Halfwrap Install Reflex Racing Handguards

Step by step instructions and videos below on how to install the Reflex Racing Handguards Halfwrap model great for motocross and more.

  1. Move the start and stop buttons inward to allow mount placement.
  2. Install the mount over the top of the levers.
  3. Use medium lock tight on the Allen screws.
  4. Adjust the halfwraps into the desired position.
  5. Install the plastic shields.
  6. Use medium lock tight on the Allen screws. Do NOT tighten them too tight or it will twist the graphics.
  7. Check and retighten bolts and screws during routine maintenance.

 

 WARNING AND DISCLAIMER: All parts manufactured, designed or sold by Reflex Racing should be installed by a qualified motorcycle technician. Riding motorcycles can be dangerous. Serious injury, death and property damage can occur. Injury is increased by improper installation or misuse of equipment. Reflex Racing’s customers must exercise good judgment in the use, control, alteration, part selection and installation, and maintenance of their motorcycles. In the event of a possible defect in material or design, or any other defect in a part manufactured, designed or sold by Reflex Racing, the responsibility of Reflex Racing is limited to a refund of the purchase price or the replacement of the part if Reflex Racing determines the part to be defective, and subject to Reflex Racing’s inspection of the part within thirty (30) days from the date of purchase. (Note: any attempted repairs or modifications made to Reflex Racing products will void this limited warranty). Reflex Racing, under no circumstances will be responsible for incidental and/or consequential damages, property damage, personal injury damage, or damage, injury, cost or expense of any kind or nature whatsoever except as provided by law. Reflex Racing makes no other warranty, express or implied, including without limitation any warranties of merchantability and fitness for a particular purpose.